Electrical problems cannot be underestimated and regardless of whether you run a small business, a large factory or you want to maintain a safe household, they can damage machines and appliances and also pose a risk to your life and property. If it just so happens that there are any faults detected in the wiring or cables of electrical devices and there is no proper maintenance or timely diagnosis conducted, a fatal accident might occur.
Finding a reliable and professional electro-mechanical repair shop can be an excellent idea as it will provide proper inspection of electrical appliances and devices to avoid any mishaps. In this article, we’ll list some of the most common electrical problems and solutions you should know about so that you can avoid a bigger issue or threat.
Transients, also known as surges, are the lighting-fast striking of light. They are described as short-term changes in voltage and occur for a split second. Usually, they happen due to poor electrical wiring, faulty appliances, and even damaged power line, but they also happen when there are lightning strikes. Surges are quite common but if they happen frequently, they can damage any electronic devices and equipment that are connected at the exact moment and lower their life expectancy. If, on the other hand, they stop and don’t repeat themselves, then they are nothing to worry about. To make sure that nothing bad happens, check to see if there’s anything wrong with your wires and check your electrical connection that connects the devices to the home grid. Disconnect the power boards or devices from the outlet and if the transients keep going on, call an electrician.
No RCCB or RCD
An RCCB (Residual Current Circuit Breaker) or RCD (Residual Current Device) is a device used to detect and prevent low voltage circuits if there is a current leak. The device will automatically discontent the load from the main supply if it detects a leakage while the current is flowing abnormally. As the RCCB reduces the chances of electrical shock, it’s essential to have such a device at home and ensure protection against direct and indirect currents and electrical fire. For this reason, to prevent electrocution that can result from leakage, get an RCCB installed by a professional.
Circuit Breaker Keeps Tripping
If you notice that your circuit breaker is constantly tripping, there is a high chance that it has detected some kind of issue in the current circuit. This is how they got their name “circuit breaker” because they break up circuits when they sense there’s something off with the flow of the current. In such a case, you need to locate the main electrical system panel in your home as that is where all the main control switches are and you will then see a switch panel that has its switch turned off or partly off and you will only need to flip the switch back on. If the same problem continues, it’s wise to call an electrician to check things.
Frequent Bulb Burnouts
If you’re tired of changing your bulb all the time, there might not be a fault with the bulbs you’re buying. You could be experiencing an electrical problem at your house. There are many reasons why bulb lights burn out often, It can be the result of high voltage, poor air circulation, tightly fixed bulbs, and much more. If you wonder what steps to take, first check to see if the holder is loose or depleted. If there’s no such issue and the bulbs you use still go to waste, then consult with an electrician to see what is going on.
Uncovered Junction Box
Junction boxes are designed to separate one section of wires from another. They also serve to protect the wires from external forces that can damage them. The use of junction boxes is especially important in large buildings because when there is an electrical issue in one part of a building, the wires to that building can easily be located in the concrete junction box. If it isn’t properly covered, it can be difficult to locate which set of wires has problems. What is even more important is that a junction box can prevent severe injuries and chances of electrocution. If you’re unsure of how to install or cover a junction box, you can hire a professional and prevent any potential problems and damages.
Electrical problems can be aggravating and dreadful and you should always make sure to check electrical appliances, equipment, the circuit and other components to identify an issue and fix it. However, since safety comes first, if you’re unsure about a particular issue, call a trained professional to solve any electrical problems.